Browsing articles from "March, 2012"

Display with bad quality

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of DISPLAY IN BAD QUALITY, 

  • – May be the video driver is not installed or corrupted.
  • – Check the installation of the graphics card and try to clean the contact of your graphic device and re-install it again properly. 

Hardware driver installation

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of HARDWARE DRIVER INSTALLATION, 

  • – Check the drivers of your system. All devices have their own driver that must be installed properly to ensure the effectiveness of each devices.
  • – Double click the system properties located at the control panel and click on the hardware, then device manager. You can see all devices installed on your PC with individual icons. If you notice an icon of “?” with a yellow color, that means the device is not properly installed yet or it has a driver problem.
  • – Double click on the device you’d like to install a driver. When a new window shows up, click install/re-install driver, then browse the appropriate driver for the device then click “OK”. If the driver supply is incorrect, it will ask you to re-install again. 

System Hangs-up / Restarts

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of SYSTEM HANGS-UP / RESTARTS, 

  • – Check the CPU fan if it is properly working.
  • – Check the memory module’s installation. Try to clean and re-insert it if necessary.
  • – Try to reduce the start-up program in the system tray. If these cannot be done, you may need to upgrade your memory capacity.
  • – It maybe caused by a system problem! Try to re-install the operating system. 

No Display with CPU Power

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of NO DISPLAY WITH CPU POWER,

  • – Make sure that the monitor is working properly. Test it using other CPU.
  • – Check signal cable of the monitor if properly plugged.
  • – Check the graphics card’s installation. If you hear a beeping sound, try to clean and re-insert the graphics card.
  • – Check the memory module’s installation. If a beeping sound is heard continuously, try to clean and re-insert the memory module. 
Pages:«1234567891011»