Browsing articles tagged with " pc problem"

How to set optical drive to be in first boot?

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

How to set optical drive to be in first boot?

  • – Turn on the unit and press the corresponding key to enter in the CMOS/BIOS. It maybe Del, F2, F10, Ctrl+Alt+Del or other key depending on the computer. (It displays the start of the booting.)
  • – Once in the BIOS SET-UP, look for the SUB-MENU, and check the BOOTING SEQUENCE of the drive. Make sure that the optical drive is the first in the list.
  • – Save and exit the changes made in the BIOS Set-up.

OS installation problem. Hanging-up or restarting frequently.

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of OS INSTALLATION PROBLEM. HANGING-UP OR RESTARTING FREQUENTLY.

  • – Check installation disk, some scratches on a disk are able to cause miscopying of files.
  • – Check your optical disk drive. Some disk drives may not be able to read the cd driver properly.
  • – Check the memory module’s installation. If it is properly installed and problems still occur, try to clean and re-insert them. If you are using 2 or 3 memory modules, put them one at a time when setting up windows. This will help you determine if one of the memory module has problem. 

No sound output

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of NO SOUND OUTPUT, 

  • – Check the connection between the CPU and the speaker.
  • – Check if the driver is properly installed. Make sure that it is of the same manufacturer. This incident normally occurs in AC’97 sound devices that have many manufacturers.
  • – If the driver is installed properly, you may need to put a jumper in front of the audio panel. [this works with some motherboards only]

Display with bad quality

Mar 11, 2012   //   by   //   Blog, Troubleshooting  //  No Comments

In case of DISPLAY IN BAD QUALITY, 

  • – May be the video driver is not installed or corrupted.
  • – Check the installation of the graphics card and try to clean the contact of your graphic device and re-install it again properly. 
Pages:«1234»